Gorenje washing machine efficiency relies on SensorIQ technology that automatically optimises the washing process. With energy ratings of A+++ and features including SteamTech and AquaStop, this is an appliance that makes doing the laundry simple.
When things go wrong it’s helpful to know why – even if you need to contact a professional to put it right! See a range of Gorenje washing machine faults and troubleshooting here…
Gorenje washing machine faults range from the door not closing properly to heater failure. The appliance will signal the fault as soon as it’s detected and the programme will stop. If the fault is signalled when the washing machine is working the error code will simultaneously be displayed with flashing LEDs.Causes of the flashes are listed below:
- - One flash – temperature sensor failure
- - Two flashes – the door isn’t closed correctly
- - Three flashes – inappropriate water intake
- - Four flashes – spinning sensor failure
- - Five flashes – motor failure
- - Six flashes – heater failure
- - Seven flashes – inappropriate water outlet
Bear in mind that occasionally interferences from the environment can cause the washing machine to signal faults. Re-occurring faults should always be checked out by a qualified repair engineer.
Error Codes for Gorenje Washing Machines
See a selection of Gorenje washing machine fault codes here:Gorenje washing machine fault code F1
If a problem has been detected with the water heating temperature sensor the wash programme will complete, but the water won’t be heated. When this temperature sensor fault is indicated checks will need to be made on the wiring to the temperature sensor itself, the heater, and the wiring to the control module and timer. The thermistor may have to be expertly replaced if faulty.Gorenje washing machine fault code F2
The issue here is the door lock has been detected as faulty or failing to correctly engage. Checks will need to be carried out on the wiring to the door lock, the door lock itself, and the wiring to the control module or timer. Simply fixed by a trusted repair engineer.Gorenje washing machine fault code F3
When the washing machine water intake has failed to reach the right level this error code will show – and is detected by the pressure sensor. Initially, the water supply and pressure need to be investigated, followed by the water intake valve wiring and connections, and the sensor wiring and electrical connections. An electrical engineer will also safely check connections to the main control module and timer.Gorenje washing machine fault code F4
This error code indicates a problem with not spinning. This is often due to the carbon brushes have worn out – and can affect the drum not turning. Other components that need to be checked include the motor tachometer, wiring and connections to the main drive motor, and between the inverter card and the motor. All of these issues can be fixed by an experienced electrical engineer.Gorenje washing machine fault code F7
Gorenje washing machine problems can include failing to drain – and can stop with water still in it. Before diagnosing the fault, the appliance will need to be drained. The pump filter may be defective or obstructed, the drain outlet hose could be blocked, and the drain pump rotor or wiring might not be working effectively. An appliance repair technician will resolve these problems for you.
Get a Guaranteed Washing Machine Repair Service
Gorenje washing machine repair London experts will come to your property at a time that suits you. All the tools and equipment needed to carry out your repairs will be bought to your door. And highly trained technicians will use their expertise to diagnose and resolve any issues. Get a short-notice booking and a repair with a six-month quality guarantee.